10AP-SRT 10,000lb 2-Post Lift – Low-Rise by BendPak
Many service bays face challenges when choosing a lift that’s both compact and powerful. With limited space and a wide range of vehicles to service, compromises often seem unavoidable. The BendPak 10AP-SRT changes that with a strong 10,000-lb. lifting capacity and a maximum lift height of 46 inches, delivering the performance you need in a space-conscious design.
This low-profile lift is ideal for shops with height restrictions, featuring a post height of only 93.5 inches and a drive-thru clearance between 91 and 101 inches. The 10AP-SRT handles low-clearance vehicles with ease, thanks to its Low-Pro swing arms, and comes with automatic arm restraints and safety locks every 3 inches for dependable security. Whether you're doing tire service or general maintenance, this lift provides a space-saving solution without sacrificing strength or reliability.
2-Post Lift 10AP-SRT Specifications
- Lifting Capacity: 10,000 lbs. (4,536 kg)
- Maximum Capacity per Axle: 5,000 lbs. (2,268 kg)
- Overall Width: 136–146 in. (3,453–3,707 mm)
- Post Height: 93.5 in. (2,377 mm)
- Distance Between Inside Posts: 108.25–118.25 in. (2,749–3,003 mm)
- Drive-Thru Clearance: 91–101 in. (2,311–2,565 mm)
- Maximum Lifting Height: 46 in. (1,173 mm)
- Minimum Height with Pad: 4.5 in. (116 mm)
- Power Source: 220 VAC, 60 Hz, 1 Phase
- Full Rise Time: ≈45 seconds
10AP-SRT 10,000lb 2-Post Lift Key Features
- Certified by ALI
- Power-Side Post – Hosts the power unit, safety release handle, and the lowering control (on the power unit itself).
- Offside Post – The opposite column that supports lift function.
- Power Unit – Delivers hydraulic pressure to the lift, including Up/Down controls and fluid reservoir.
- Safety Lock Release Handle – Mounted on the power-side post, disengages the locks for lowering.
- Safety Covers – Enclose the safety mechanism within the posts for protection.
- Floor Plates – Shield cables, hydraulic lines, and safety systems running between posts.
- Lift Heads (Carriages) – Glide vertically inside the posts and support the lift arms.
- Lift Arms – Telescopic arms attached to the lift heads for raising vehicles.
- Adapters – Contact pads that lift the vehicle from secure points. Includes cradle adapters suited for trucks/SUVs. Optional accessories available (height extenders, pinch-weld pads, etc.).
- Height Adapter Trays – Mounted at the base of the posts to store unused adapters.
- Safety Locks – Mechanically lock the lift at multiple heights. Remain engaged even during power failure for maximum safety.
- Durable powder-coated exterior finish
- Exclusive Bi-Metric™ swing arm design offers versatile arm placement
- Single-point lock release system
- Drop-end arms reduce pad height for lower vehicles
- Twin hydraulic direct-drive cylinders for reliable operation
- Oversized 53” & 59” tall lift carriages for maximum durability
- High-efficiency HVLP electric/hydraulic power system
- Self-lubricating UHMW dura-glide bearing system
- Safety locks in each column positioned every 3 inches
- Auto-locking arm restraints support over 2,000 lbs. of lateral force
- Heavy-duty ½” equalizer cables with aircraft-grade strength
- Extra-large sheave diameters to minimize cable wear
- Comes with four triple-stage telescoping lift arms
- Warranty
-
5-Year Warranty – Structural Components
-
2-Year Warranty – Hydraulic and Power Units
-
1-Year Warranty – Electrical and Functional Parts
- Includes reasonable labor reimbursement for the first year
-
BendPak 10AP-SRT Documentation
Warehouse Pickup Locations: Claim your $400 discount – Contact us for full pickup details!
- Santa Paula, CA 93060
- Theodore, AL 36582
Order Cycle Time:
Your order will be processed within 1 to 2 business days. Please be aware that orders placed after 6 p.m. will be processed the next business day.
Shipping Information:
Typically, your order will arrive within 4 to 7 days (with free shipping on orders over $200). For orders under $200, there is a flat shipping fee of $15.
We only offer shipping within the United States at this time; international shipping is not available.
Most of our orders are shipped using third-party freight carriers (18-wheelers). If your order includes items shipped via freight, we’ll contact you to arrange a curbside delivery time. Please ensure you provide the correct phone number at checkout.
Order Payment and Confirmation:
After placing your order, you'll receive a confirmation email. This email will confirm that we’ve received your order and that your credit card has been authorized for purchase.
We will only charge your card when the item ships, if the item is backordered, we may hold a charge to secure the product for you.
Once your order is received, we’ll get it processed right away!
We strive to provide the best prices available online. If you find a lower price at any another online retailer, let us know, and we’ll beat it. We want you to be assured that you're getting the best deal on your purchase.
Our 100% Price Match Guarantee comes with the following conditions:
Promotions like rebates or buy-one-get-one-free offers are excluded.
The competitor’s website cannot be a discount or auction site (e.g., eBay).
The competitor must be an authorized retailer of the item.
The price match will consider the item price, sales tax, and shipping costs.
Price matching is not applicable to exchange orders or replacement items.
Please be aware that certain exclusions may apply.
At PrecisionPerformances, we want you to have a hassle-free shopping experience with us, so we've made our return and refund process clear and easy to understand:
Timeframe for Returns: You can return items within 30 days of purchase. After 30 days, we unfortunately cannot accept returns.
Shipping Costs for Returns : If your item is defective or incorrect, we’ll cover the return shipping costs. If you're returning an item just because you've changed your mind, you'll be responsible to handle the shipping costs yourself.
Items that are Defective or Damaged: If your item is not functioning properly or is damaged, please notify us within 30 days. We’ll arrange for a return at no extra charge for you. Once we receive and inspect the item, we’ll either send a replacement or issue a refund, including the original shipping cost.
Returns Due to Change of Mind: If you decide you no longer want the item, you have 30 days to return it. You’ll need to cover the return shipping costs. Make sure the item is unused and still in its original packaging. After we receive and inspect the item , we’ll refund the cost of the item minus the shipping fees.
Refund Policy: Once we receive and inspect your returned item, we’ll send you an email. We’ll process the refund to your original payment method within 7 business days. Keep in mind that banks or credit card companies may take a bit longer to reflect the refund. If you don’t see the refund after 10 business days, please contact us at support@precisionperformances.com
Please note that there may possibly be a restocking fee depending on the situation.
If you have any further inquires about returns or refunds, feel free to reach out to our Customer Support team at support@precisionperformances.com
Description
10AP-SRT 10,000lb 2-Post Lift – Low-Rise by BendPak
Many service bays face challenges when choosing a lift that’s both compact and powerful. With limited space and a wide range of vehicles to service, compromises often seem unavoidable. The BendPak 10AP-SRT changes that with a strong 10,000-lb. lifting capacity and a maximum lift height of 46 inches, delivering the performance you need in a space-conscious design.
This low-profile lift is ideal for shops with height restrictions, featuring a post height of only 93.5 inches and a drive-thru clearance between 91 and 101 inches. The 10AP-SRT handles low-clearance vehicles with ease, thanks to its Low-Pro swing arms, and comes with automatic arm restraints and safety locks every 3 inches for dependable security. Whether you're doing tire service or general maintenance, this lift provides a space-saving solution without sacrificing strength or reliability.
2-Post Lift 10AP-SRT Specifications
- Lifting Capacity: 10,000 lbs. (4,536 kg)
- Maximum Capacity per Axle: 5,000 lbs. (2,268 kg)
- Overall Width: 136–146 in. (3,453–3,707 mm)
- Post Height: 93.5 in. (2,377 mm)
- Distance Between Inside Posts: 108.25–118.25 in. (2,749–3,003 mm)
- Drive-Thru Clearance: 91–101 in. (2,311–2,565 mm)
- Maximum Lifting Height: 46 in. (1,173 mm)
- Minimum Height with Pad: 4.5 in. (116 mm)
- Power Source: 220 VAC, 60 Hz, 1 Phase
- Full Rise Time: ≈45 seconds
10AP-SRT 10,000lb 2-Post Lift Key Features
- Certified by ALI
- Power-Side Post – Hosts the power unit, safety release handle, and the lowering control (on the power unit itself).
- Offside Post – The opposite column that supports lift function.
- Power Unit – Delivers hydraulic pressure to the lift, including Up/Down controls and fluid reservoir.
- Safety Lock Release Handle – Mounted on the power-side post, disengages the locks for lowering.
- Safety Covers – Enclose the safety mechanism within the posts for protection.
- Floor Plates – Shield cables, hydraulic lines, and safety systems running between posts.
- Lift Heads (Carriages) – Glide vertically inside the posts and support the lift arms.
- Lift Arms – Telescopic arms attached to the lift heads for raising vehicles.
- Adapters – Contact pads that lift the vehicle from secure points. Includes cradle adapters suited for trucks/SUVs. Optional accessories available (height extenders, pinch-weld pads, etc.).
- Height Adapter Trays – Mounted at the base of the posts to store unused adapters.
- Safety Locks – Mechanically lock the lift at multiple heights. Remain engaged even during power failure for maximum safety.
- Durable powder-coated exterior finish
- Exclusive Bi-Metric™ swing arm design offers versatile arm placement
- Single-point lock release system
- Drop-end arms reduce pad height for lower vehicles
- Twin hydraulic direct-drive cylinders for reliable operation
- Oversized 53” & 59” tall lift carriages for maximum durability
- High-efficiency HVLP electric/hydraulic power system
- Self-lubricating UHMW dura-glide bearing system
- Safety locks in each column positioned every 3 inches
- Auto-locking arm restraints support over 2,000 lbs. of lateral force
- Heavy-duty ½” equalizer cables with aircraft-grade strength
- Extra-large sheave diameters to minimize cable wear
- Comes with four triple-stage telescoping lift arms
- Warranty
-
5-Year Warranty – Structural Components
-
2-Year Warranty – Hydraulic and Power Units
-
1-Year Warranty – Electrical and Functional Parts
- Includes reasonable labor reimbursement for the first year
-
BendPak 10AP-SRT Documentation
Warehouse Pickup Locations: Claim your $400 discount – Contact us for full pickup details!
- Santa Paula, CA 93060
- Theodore, AL 36582
Delivery Information
Order Cycle Time:
Your order will be processed within 1 to 2 business days. Please be aware that orders placed after 6 p.m. will be processed the next business day.
Shipping Information:
Typically, your order will arrive within 4 to 7 days (with free shipping on orders over $200). For orders under $200, there is a flat shipping fee of $15.
We only offer shipping within the United States at this time; international shipping is not available.
Most of our orders are shipped using third-party freight carriers (18-wheelers). If your order includes items shipped via freight, we’ll contact you to arrange a curbside delivery time. Please ensure you provide the correct phone number at checkout.
Order Payment and Confirmation:
After placing your order, you'll receive a confirmation email. This email will confirm that we’ve received your order and that your credit card has been authorized for purchase.
We will only charge your card when the item ships, if the item is backordered, we may hold a charge to secure the product for you.
Once your order is received, we’ll get it processed right away!
Price Match Guarantee
We strive to provide the best prices available online. If you find a lower price at any another online retailer, let us know, and we’ll beat it. We want you to be assured that you're getting the best deal on your purchase.
Our 100% Price Match Guarantee comes with the following conditions:
Promotions like rebates or buy-one-get-one-free offers are excluded.
The competitor’s website cannot be a discount or auction site (e.g., eBay).
The competitor must be an authorized retailer of the item.
The price match will consider the item price, sales tax, and shipping costs.
Price matching is not applicable to exchange orders or replacement items.
Please be aware that certain exclusions may apply.
Returns
At PrecisionPerformances, we want you to have a hassle-free shopping experience with us, so we've made our return and refund process clear and easy to understand:
Timeframe for Returns: You can return items within 30 days of purchase. After 30 days, we unfortunately cannot accept returns.
Shipping Costs for Returns : If your item is defective or incorrect, we’ll cover the return shipping costs. If you're returning an item just because you've changed your mind, you'll be responsible to handle the shipping costs yourself.
Items that are Defective or Damaged: If your item is not functioning properly or is damaged, please notify us within 30 days. We’ll arrange for a return at no extra charge for you. Once we receive and inspect the item, we’ll either send a replacement or issue a refund, including the original shipping cost.
Returns Due to Change of Mind: If you decide you no longer want the item, you have 30 days to return it. You’ll need to cover the return shipping costs. Make sure the item is unused and still in its original packaging. After we receive and inspect the item , we’ll refund the cost of the item minus the shipping fees.
Refund Policy: Once we receive and inspect your returned item, we’ll send you an email. We’ll process the refund to your original payment method within 7 business days. Keep in mind that banks or credit card companies may take a bit longer to reflect the refund. If you don’t see the refund after 10 business days, please contact us at support@precisionperformances.com
Please note that there may possibly be a restocking fee depending on the situation.
If you have any further inquires about returns or refunds, feel free to reach out to our Customer Support team at support@precisionperformances.com
Item Added to Your Cart
Customers also bought...
Related Products
SAVE
43%
SAVE $259.00
SAVE
14%
SAVE $75.00
SAVE
30%
SAVE $59.00
SAVE
12%
SAVE $639.00
3
visitors right now
3
visitors have this item in their cart right now
3
people have bought this item
3
% of people buy 2 or more
