Concrete Mixers

Showing 1-24 of 65 results

BendPack Patriot TSP-580V-601 80-Gallon Vertical Tank Air Compressor

$5,095.00

IMER Towable Multi-Mixer | 5.5 HP | Steel Drum | Workman II 350 - 1105855

SAVE 9%

SAVE $494.90

IMER Towable Multi-Mixer | 5.5 HP | Steel Drum | Workman II 350 - 1105855

$4,949.00 $5,443.90

IMER Tracked Dumper | 180° Swivel Dump | 5070 lbs Operating Load | Tracker 4150 5230001

SAVE 10%

SAVE $8,740.50

IMER Tracked Dumper | 180° Swivel Dump | 5070 lbs Operating Load | Tracker 4150 5230001

$78,000.00 $86,740.50

IMER Towable Multi-Mixer | 1.5 HP | Steel Drum | Workman II 250 - 1105843

SAVE 9%

SAVE $494.90

IMER Towable Multi-Mixer | 1.5 HP | Steel Drum | Workman II 250 - 1105843

$4,949.00 $5,443.90

IMER Tracked Dumper | 180° Swivel Dump | 3,307 lbs Operating Load | TRACKER 2833 5150002

SAVE 10%

SAVE $5,976.30

IMER Tracked Dumper | 180° Swivel Dump | 3,307 lbs Operating Load | TRACKER 2833 5150002

$55,000.00 $60,976.30

IMER Spray & Grout Pump | Electric Pump | Step-Up 120 Three Phase 1106181

SAVE 9%

SAVE $1,899.90

IMER Spray & Grout Pump | Electric Pump | Step-Up 120 Three Phase 1106181

$18,999.00 $20,898.90

IMER Spray & Mixing Pump | Continous Cycle | 5 HP | Single Phase | Koine 35 1106315

SAVE 10%

SAVE $2,535.50

IMER Spray & Mixing Pump | Continous Cycle | 5 HP | Single Phase | Koine 35 1106315

$22,000.00 $24,535.50

SAVE 9%

SAVE $16.90

IMER Pintle Tow Ring 1107161

$169.00 $185.90

SAVE 9%

SAVE $5.90

IMER Continues Rim Tile Blades

$59.00 $64.90

IMER Dual Diaphragm Air Compressor 1107602

SAVE 12%

SAVE $346.90

IMER Dual Diaphragm Air Compressor 1107602

$2,600.00 $2,946.90

IMER Mighty Small 50 Modular Air Compressor 1107546

SAVE 12%

SAVE $393.90

IMER Mighty Small 50 Modular Air Compressor 1107546

$2,850.00 $3,243.90

Imer Small 50 Controlled Pressure Grout Kit

$2,800.00

IMER Horizontal Shaft Mortar Mixer | 12 cu ft Steel Drum | HSM 12 - 1130121

SAVE 10%

SAVE $848.90

IMER Horizontal Shaft Mortar Mixer | 12 cu ft Steel Drum | HSM 12 - 1130121

$7,400.00 $8,248.90

Star Industries Concrete Hopper with Side Chute 1.31cy 1520

$5,618.90

Star Industries Concrete Hopper with Side Chute 1.05cy 1510

$4,800.00

Erskine Mini Landscape Rake | Working Width 48" | Hydraulic Motor Flow Range 13-25 GPM | For Mini Skid Steer

$9,894.50

Imer Oil Seal for Workman Mixers

$5.68

Imer Minuteman Replacement Steel Drum

$644.62

Imer Screw for Combi Saws

$7.35

Imer Gear Box Gasket

$48.22

Imer Mixer Shaft Each

$89.78

Imer T-NUT / Support

$6.84

Imer MinuteMan II Wrench

$6.00

Imer Locknut

$5.20

1 2 3

NOT free shipping!

We ordered this lift with supposedly free shipping. The listing does say regarding free shipping "some exclusions may apply" but the only exclusion I could find was if the order was less than $200. I was emailed an order confirmation that stated my total was $1552 with no shipping or tax. They immediately charged my credit card for that amount (which according to their fine print they would not charge my credit card until it shipped). When we called to ask how it would be delivered to our address we were told there would be a $400-$500 delivery charge unless we picked it up at 1 of 2 warehouse locations in New York State (we were never told what cities these were in). We decided to cancel the order which was not easy. This company is very deceiving, and their representatives are pushy and talk over you. BEWARE!

Overall good machine

I wish there was a way to turn the spray gun to do curbs. It would be nice to have a brake on it. More videos about the machine would be great, like how to use it, clean it, assemble it, etc.
But for half the cost of the others, I would buy this again.

Thank you Paul! Please feel free to reach out with any questions.

Warm Regards,
Precision Performances Team
(844)-513-6374

It's heavy

That's as far as I've gotten.

Hi William yes it heavy as this is for heavy duty use. How has your progress been so far?

Titan Pickleball machine

We are very happy. The machine and battery came as promised. Everything is working as it should as of now. We would do business with them again.

Hi Michelle thank you for your review we are very grateful. Hope you enjoy this machine!

Probably the BEST Starter Striping Machine

Hi. I decided to purchase my NS4250 after an intense research period. As with most things cost and versatility were the main factors. I've never been impressed with brand names. I was sold after a YouTube video by Chris the Striping Guy reviewed a 4250. I like that it can shoot both water and solvent borne line paint. I like that it has large pneumatic tires which is good for uneven or imperfect surfaces. The gun is of very good quality. The unit seems heavy and stable enough for what it's intended to do. There's only two things I would like to see different. First, having the available rear pivot wheel come standard rather than a $350 option would be nice. Secondly, having a second or even a third spray nozzle would be awesome as it would give you more versatility. The #617 included with the rig, as I understand it is a middle of the road spray tip. The numbers and specs for each spray tips are not hard to understand, and seem to be consistent, but the prices for additional tips are all over the place, even for the same # tips. So it's hard to know what you're getting when ordering random tips from wherever. I also learned that they are not interchangeable to different makes of airless sprayers. So need for caution there. Seems like NS is missing a chance to sell us on their tips. Having two or three options for different spray tips that come standard would be helpful and as noted add a high level of versatility to an already great little machine.

As with all of my big purchases I shop around. I actually purchased the machine from a company in Richmond Texas called Precision Performances. All total the cost was $2828.44 including tax and a $50 new customer discount. Shipping was free. The weird part was that it shipped directly from Newstripe in Aurora Colorado where they are made. That's weird because on the Newstripe website the same exact machine was the exact same features and components sells for $3131.00 plus applicable taxes, and no discounts.
That would have been $3389 and change. That means I got the exact same thing from a competitor for over $560 cheaper than getting it direct from the Newstripe website. I don't understand why that is, but I'll take it. Since it's a brand new NS machine with all documentation, I would assume all I need to is call the company I purchased it from or Newstripe directly to address any warranty issues. Since receiving the machine, I set it up, got it running, primed it, and dialed it in shooting water for practice. Everything worked out as expected. There will be fine adjustments when I start pumping paint through it, but that's to be expected. I'm due to use it commercially for my first line striping job as soon I as receive the traffic paint I ordered. To be sure it's a sizeable purchase, but I'm satisfied with what I received. I only hope it holds up and if any issues arise that require warranty service, their customer service will be as good as what it appears their machine is.

-Andrew
Handy Home Services LLC/Precision Striping
TEXAS

Hi Andrew, thank you for this review we are very grateful. Please feel free to reach out with any questions.

(844) 513-6374

Let customers speak for us